池州电厂一期工程2×300MW发电机组工程投标施工组织设计..doc

施工组织设计

1.工程概述
1.1 工程简况
池州电厂一期工程2×300MW发电机组，由安徽电建一公司于2003年7月22日中标承包施工，目前电建一公司池州电厂项目部已进驻施工现场并全面展开工作，砼预制桩具备招标条件。
1.2 工程范围、内容及工程量
本标工程为池州电厂砼预制桩工程，桩型号为97G361图集中的JZHb-250-1112CG(烟囱)及JZHb-250-1414CG(主厂房)，砼强度C40，单桩竖向承载力为1500kN。工程范围、内容及工程量如下：
烟囱桩基：桩运输(安庆老峰电厂至现场)，打、接、送砼预制桩(锤击)、桩孔回填土施工、配合高低应变实验。桩规格500×500×23000mm，约200根。
主厂房桩基：桩预制、施工现场运输倒运及打桩、接桩、送桩(锤击)、桩孔回填土施工、配合高低应变实验。桩规格500×500×28000
Construction Design

1. Project Overview
1.1 Project Briefing
Chizhou Power Plant Phase 2 × 300MW generating units, by Anhui Electric Construction Company in the July 22, 2003 awarded the construction contract, the current electric company building a power plant project in Chizhou Department has entered the construction site and fully operational, concrete precast pile with the tender conditions.
1.2 The scope, content and quantities
The standard power plant projects Chizhou prefabricated concrete piles, pile model 97G361 Figure concentrated JZHb-250-1112CG (chimney) and JZHb-250-1414CG (main building), concrete strength C40, vertical bearing capacity is 1500kN . Scope, content and quantities are as follows:
Chimney pile: pile Transport (Anqing old peak power to the scene), play, receive and deliver precast concrete piles (hammer), Pile backfill construction, with high and low strain experiments. Pile size 500 × 500 × 23000mm, about 200.
Powerhouse pile: pile of prefabricated construction site transport out of luck and piling, the pile, sending piles (hammer), Pile backfill construction, with high and low strain experiments. Pile size 500 × 500 × 28000