室内电气安装常见缺陷的防治.doc
室内电气安装常见缺陷的防治
室内电气安装工程中,经常因为一些缺陷而影响施工质量,因此,对该类缺陷的预防处理,就显得尤为重要。
一、塑料管线敷设
1、常见缺陷
接口不严密,有漏水、渗水现象;现浇板内配管时出现管、盒内漏浆、堵塞,造成剔凿混凝土的后果;煨弯处出现扁、凹、裂等。
2、缺陷原因
接口处渗水是因为接口处未加套;管或承插口做得太短,又未涂粘结剂,只用黑胶布或塑料带包缠,而未按规程施工。PVC管煨弯时未加热或加热不均匀,造成管路扁、凹、裂现象。
3、预防处理
Interior electrical installation Defects Prevention
Interior electrical installation works, often because of some defects at the construction quality, therefore, that type of defect prevention treatment, it is very important.
A plastic pipe laying
A common defect
Interface is not tight, there is leakage of water leakage; place when piping plate pipe, box mud leakage, blockage, causing tick chisel concrete consequences; simmer bend occurring at the flat, concave, split and so on.
2, Defects
Interfaces because the interface of water seepage is not jacketed; tube or bearing jack too short, it is not coated adhesive, only with black tape or plastic wrapped, but fails to order construction. PVC pipe and far corner without heating or uneven heating, resulting in pipeline flat, concave, crack phenomenon.
3, Prevention Treatment
帮助中心 收藏 >>> |
本类栏目导航
总点击排行
- 天正建筑2013最新64位破解版
- 173549次
- Autocad2013 64位32位破解版附带注册机
- 154873次
- 天正建筑8.5破解版
- 146385次
- autocad2012 64位32位 破解版(附注册
- 139022次
- 天正建筑8.2破解版
- 127265次
- autocad2010免费下载(简体中文版)
- 98144次
- 免费农村房屋设计图
- 90906次
- CAD2008注册机及使用说明
- 84341次
- 11g101图集全套下载
- 78882次
- cad图集大全
- 67445次
- 天正电气8.5破解版
- 18395次
- 防雷引下线做法
- 2002次
- 国家标准图集-电气图例(CAD)
- 1320次
- 10kV及以下架空配电线路设计技术规程
- 1080次
- 山西***110kv输电线路施工组织设计(含
- 1074次
- 电气制图和识图知识
- 1020次
- 外电防护方案
- 1007次
- 铜芯电线电缆载流量标准IEC60364-5-523
- 944次
- 电梯安装施工方案
- 812次
- 线路敷设方式代号对照
- 775次