张江高科技园区标准厂房管沟防水施工组织设计.doc
管沟防水为地下一级防水。由于管沟长期处于地下浸水环境中,故防水工程所用的材料为JS II型复合防水涂料,其是高分子材料以聚合物乳液和水泥为主要原料,加以各种添加剂制成的双组份水性建筑防水涂料。此次管沟的防水作业设计仅适用于南北向管沟及东西向约40m长管沟的防水工程。防水涂料作用范围为管沟顶板、侧墙和部分底板侧壁的迎水面,即在迎水面涂刷一层厚度为1.5mm的JS II型复合防水涂料。
Trench for the underground water level of water. As long trench in the ground water immersion environment, it works with a waterproof material JS II composite waterproof coating, which is a polymer material with polymer emulsion and cement as the main raw material, to be made of a variety of two-component water-based additives waterproofing coating. The trench design of the waterproofing work only for north-south and east-west trench about 40m long trench of the waterproofing. Waterproof coating for the pipe trench scope roof, side walls and some floor wall of the water face, that is, in welcoming the brush layer thickness of 1.5mm of JS II composite waterproof coating.
帮助中心 收藏 >>> |
本类栏目导航
总点击排行
- 天正建筑2013最新64位破解版
- 173549次
- Autocad2013 64位32位破解版附带注册机
- 154873次
- 天正建筑8.5破解版
- 146385次
- autocad2012 64位32位 破解版(附注册
- 139022次
- 天正建筑8.2破解版
- 127265次
- autocad2010免费下载(简体中文版)
- 98144次
- 免费农村房屋设计图
- 90906次
- CAD2008注册机及使用说明
- 84341次
- 11g101图集全套下载
- 78882次
- cad图集大全
- 67445次
- 给水排水构筑物施工及验收规范GBJ141-9
- 1513次
- 给排水管道通水试验记录
- 931次
- 给水排水通用图集(CAD)
- 858次
- 建筑给水排水设计规范GB50015-2003
- 830次
- 共板法兰风管制作安装工艺
- 793次
- 给水排水及采暖工程报验用表列表
- 750次
- 建筑给排水及采暖工程施工质量验收资料
- 575次
- ***室外排水管道施工方案
- 570次
- 水泵扬程估算方法
- 569次
- 给排水工程施工组织设计方案
- 530次