安全技术操作规程大全.doc
第一章 施工作业人员安全技术操作规程 01
1.1 施工现场 01
1.2 机电设备 02
1.3 高空作业 03
1.4 季节施工 03
第二章 架子工操作规程 05
2.1 脚手架材料 05
2.2 外脚手架 05
2.3 里脚手架 07
2.4 其他脚手架 07
2.5 脚手架拆除 11
第三章 普通工操作规程 12
3.1 一般规定 12
3.2 挖土 12
3.3 挖扩桩孔作业 13
3.4 装卸搬运 14
3.5 人工拆除工程 14
第四章 石工、水磨石工操作规程 16
4.1 石工操作规程 16
4.2 水磨石操作规程 16
第五章 抹灰工操作规程 17
第六章 水暖工操作规程 18
第七章 防水工操作规程 19
第八章 钳工操作规程 21
第九章 管道安装操作规程 23
第十章 自动仪表安装工操作规程 24
第十一章 起重机操作规程 25
11.1 塔式起重机 25
11.2 汽车式、轮胎式起重机 25
第十二章 施工电梯操作规程 27
12.1 一般规定 27
12.2 安全操作 27
12.3 安装与拆除 28
第十三章 木工操作规程 30
13.1 支模拆模 30
13.2 木构件安装 30
13.3 木工机械操作规程 31
第十四章 钢筋工操作规程 34
14.1 制作、绑扎 34
14.2 冷拉和张拉 34
14.3 预应力钢筋张拉工 35
14.4 钢筋机械操作规程 36
第十五章 混凝土工操作规程 39
第十六章 油漆玻璃工操作规程 40
16.1 油漆工操作规程 40
16.2 玻璃工操作规程 40
第十七章 瓦工操作规程 42
第十八章 电工操作规程 43
18.1 一般要求 43
18.2 设备及内线安装 43
18.3 外线及电缆工程 45
18.4 电器调试 46
18.5 施工现场变配电及维修 48
18.6 外线及电缆工程 49
18.7 电器调试 49
第十九章 电焊工操作规程 51
第二十章 气焊工操作规程 53
第二十一章 起重工操作规程 55
21.1 一般要求 55
21.2 起重桅杆 56
21.3 结构吊装 57
21.4 设备吊装 57
第二十二章 爆破作业安全技术操作规程 59
22.1 爆破作业人员规定 59
22.2 爆破员应符合的条件 59
22.3 爆破器材库主管及爆破器材保管员的职责 59
22.4 爆破段(班)长的职责 60
22.5 爆破员的职责 60
22.6 爆破作业的基本规定(一般规定) 60
22.7 火花起爆 65
22.8 电力起爆 65
22.9 导火索起爆 66
22.10 一般爆破 67
22.11 其他爆破 67
22.12 爆破的安全距离 67
第二十三章 土方、桩工机械操作规程 69
23.1 一般规定 69
23.2 挖掘机 70
23.3 推土机 71
23.4 平地机 74
23.5 装载机 74
23.6 钻孔机 75
23.7 桩工机械 76
第二十四章 中小机械操作规程 80
24.1 混凝土、砂浆搅拌机操作规程 80
24.2 卷扬机操作规程 81
24.3 外用电梯操作规程 81
24.4 蛙式打夯机 82
24.5 砂轮机操作规程 83
24.6 手电钻操作规程 84
24.7 倒链操作规程 84
24.8 千斤顶操作规程 85
24.9 附着式塔式起重机操作规程 85
24.10 机动翻斗车操作规程 86
24.11 灰浆搅拌机操作规程 86
24.12 混凝土泵送设备操作规程 87
24.13 空气压缩机操作规程 89
24.14 风钻操作规程 89
Construction work in chapter 01 the safety of technical operation
1.1 Construction Site 01
1.2 Electrical Equipment 02
1.3 Aerial 03
1.4 Construction of 03 seasons
Practice for Chapter 05 Jia Zigong
2.1 scaffolding material 05
2.2 External scaffold 05
2.3 in scaffold 07
2.4 Other Scaffolding 07
2.5 Scaffolding dismantling 11
Practice for Chapter 12 General Public
3.1 General provisions 12
3.2 Excavation 12
3.3 operating 13 hole dug pile
14 3.4 Handling
14 3.5 manual removal
Chapter masonry, terrazzo workers operating procedures 16
Practice for 16 4.1 Mason
4.2 terrazzo operating procedures 16
Chapter 17 Practice for plastering work
Practice for Chapter 18 plumbers
Chapter 19 Practice for waterproofing work
Practice for Chapter 21 fitter
Chapter 23 Practice for pipe installation
Chapter 24 Practice for Automatic meter installation work
Chapter XI crane operating procedures 25
11.1 25 tower crane
11.2 car type, tire cranes 25
Chapter XII of Practice for the construction of 27 lift
27 12.1 General Provisions
27 12.2 Security operations
Installation and removal of 28, 12.3
Chapter XIII 30 Practice for Woodworking
13.1 30 form removal mode
13.2 The timber component installation 30
Practice for woodworking machinery 31 13.3
Chapter XIV Gangjin Gong Practice for 34
14.1 Production, lashing 34
Cold drawn and tension 14.2 34
14.3 tensioning work 35
14.4 Reinforcement Practice for 36
Practice for Concrete Engineering Chapter XV 39
Practice for 40 of Chapter XVI paint Glazier
16.1 painter operating procedures 40
16.2 Glazier operating procedures 40
Chapter XVII bricklayer operating procedures 42
Chapter XVIII 43 electric operation rules
43 18.1 General requirements
18.2 Equipment and installation of 43 linear
Outside line and cable project 45 18.3
46 18.4 Electrical Commissioning
18.5 Construction and maintenance of distribution site 48
Outside line and cable project 49 18.6
49 18.7 Electrical Commissioning
Chapter XIX 51 welders operating procedures
Practice for Chapter 53 Gas Welder
Practice for the 21st chapter rigger 55
55 21.1 General requirements
Lifting mast 56 21.2
21.3 Structure of lifting 57
21.4 Equipment Hoisting 57
Chapter XXII technical operation Safety blasting 59
22.1 59 officers in blasting operations
22.2 Members shall comply with the conditions of blasting 59
22.3 Blasting equipment and blasting equipment custodian bank in charge of the duties of 59
22.4 Blasting section (class) long duty 60
22.5 Duties of 60 blasting
The basic requirements of blasting operations 22.6 (General Provisions) 60
22.7 spark initiation 65
65 22.8 Power initiation
22.9 detonating fuse 66
General blasting 67 22.10
22.11 67 other blasting
Blow the safe distance of 67 22.12
Twenty-three chapters earthwork, pile machine operating procedures 69
23.1 General provisions 69
23.2 Excavator 70
23.3 bulldozer 71
74 23.4 grader
23.5 Loader 74
75 23.6 Drilling
23.7 Machinery 76
Practice for the twenty-four chapters of 80 small machine
24.1 concrete, mortar mixer operating procedures 80
24.2 winch operation rules 81
Practice for outdoor elevator 81 24.3
82 breaststroke tampers 24.4
Grinding machine operating procedures 83 24.5
24.6 Practice for 84 hand drill
Practice for reversing chain 84 24.7
24.8 Practice for 85 jack
24.9 85 attached tower crane operational procedures
24.10 86 mobile dump truck operating rules
24.11 Practice for 86 mortar mixer
24.12 Practice for concrete pumping equipment 87
Practice for 89 air compressor 24.13
24.14 pneumatic drill operating procedures 89
帮助 收藏 报错 评论>> |
本类栏目导航
总点击排行
- 天正建筑2013最新64位破解版
- 160462次
- Autocad2013 64位32位破解版附带注册机
- 148292次
- 天正建筑8.5破解版
- 144039次
- autocad2012 64位32位 破解版(附注册
- 137473次
- 天正建筑8.2破解版
- 123378次
- autocad2010免费下载(简体中文版)
- 97140次
- CAD2008注册机及使用说明
- 80796次
- 免费农村房屋设计图
- 73688次
- cad图集大全
- 56717次
- 11g101图集全套下载
- 45191次
- 安全生产管理制度(汇集)
- 4282次
- 安全技术操作规程大全
- 1655次
- 施工现场安全生产十大纪律
- 1347次
- 广东省安全管理资料统一用表(附:填写
- 1137次
- 各种机械设备安全操作规程
- 803次
- 现场安全文明施工标准图集WORD格式
- 785次
- 施工企业现场安全全套内业资料
- 627次
- 九牌一图展示
- 592次
- JGJ162-2008建筑施工模板安全技术规范
- 558次
- GB-50348-2004安全防范工程技术规范
- 500次