起重工安全技术操作规程.doc

起重工安全技术操作规程
一、 一般要求
1、起重指挥应由技术熟练、懂得起重机械性能的人员担任。指挥时应站在能够照顾到全面工作的地点，所
发信号应事先统一，并做到准确、宏亮和清楚。￣
2、 80吨以上的设备和构件，风力达五级时应停止吊装。
第514条所有人员严禁在起重臂和吊起的重物下面停留或行走。
3、使用卡环应使长度方向受力，抽销卡环应预防销子滑脱，有缺陷的卡环严禁使用。
4、起吊物件应使用交互捻制的钢丝绳（安全系数见下表1）。钢丝绳如有扭结、变形、断丝、锈蚀等异常现
Rigger safety technology manipulative
1, General requirements
1, lifting the command should be skilled and know how to lifting the performance of the officer. Command should be standing to take care of the overall work of the location, the
Signal should be pre-unification, and to achieve accurate, loud and clear. ¯
2, 80 tons of equipment and components, wind up to 5 when to stop lifting.
Article 514 prohibited all personnel in the arm and lifted the heavy lifting to stay or walk below.
3, using the clasp length direction of the force should be made, pumping pin clasp pin should prevent slippage, the defective part is prohibited to use the card.
4, lifting objects should use the interactive twisting the steel wire rope (safety factor see table 1 below). If wire rope kink, deformation, broken wires, corrosion and other anomalies are