某高层工程塔吊选用方案.rar
某高层工程塔吊选用方案
根据B标段工程特点,在该工程的垂直运输机械的选用上,我公司优先考虑了采用由建设部长沙建设机械研究院设计的QTZ63(5013)型与南京第一建筑机械厂生产的QTZ60A型两种新型自升附着式建筑塔式起重机。QTZ63(5013)型与QTZ60A型起重机均为水平臂架,小车变幅,上回转自升式多用途塔式起重机。其中QTZ63(5013)型臂长为50M,最大起重量为6吨,自重62T(100M);QTZ60A型臂长为45M,最大起重量为6吨,自重53.8T(100M)。此两款机械主要的共同特点如下:
1、上部采用液压自顶升,利用自身进行增加或
Selection of a high-level engineering programs Tower Crane
Lot B project according to the characteristics of the project in the selection of mechanical vertical transportation, I give priority to the use of the company by the Ministry of Construction of Changsha Construction Machinery Research Institute design QTZ63 (5013) based with the Nanjing Construction Machinery Plant produced the first type QTZ60A Since the rise of two new tower crane attachment architecture. QTZ63 (5013) are the type and level of QTZ60A crane jib, trolley, on the back transferred from lift multi-purpose tower crane. One QTZ63 (5013)-arm length of 50M, the maximum lifting capacity of 6 tons, Weight 62T (100M); QTZ60A-arm length of 45M, the maximum lifting capacity of 6 tons, Weight 53.8T (100M). The two main common characteristics of machine are as follows:
1, the upper hydraulic top-up, increased use itself or
帮助中心 收藏 >>> |
本类栏目导航
总点击排行
- 天正建筑2013最新64位破解版
- 173549次
- Autocad2013 64位32位破解版附带注册机
- 154872次
- 天正建筑8.5破解版
- 146385次
- autocad2012 64位32位 破解版(附注册
- 139021次
- 天正建筑8.2破解版
- 127265次
- autocad2010免费下载(简体中文版)
- 98144次
- 免费农村房屋设计图
- 90905次
- CAD2008注册机及使用说明
- 84340次
- 11g101图集全套下载
- 78882次
- cad图集大全
- 67445次
- 全套教学楼毕业设计
- 2515次
- 5号、4A号砖砌化粪池施工方案
- 2122次
- 施工围墙施工方案
- 1698次
- 后浇带施工方案
- 1486次
- 悬挑式脚手架施工方案
- 1412次
- 冬季施工应急预案
- 1215次
- 大型机械土石方平整工程施工方案
- 1204次
- 现场安全文明施工方案
- 1150次
- 悬挑卸料平台搭设方案及计算
- 1138次
- 楼梯踏步护角做法(CAD)
- 1111次