壁柜、吊柜安装技术交底.doc

交底内容：
壁柜、吊柜安装
本技术交底适用于一般建筑和宾馆建筑壁柜、吊柜安装工程。
1．材料要求
（1）壁柜、吊柜木制品由工厂加工成品或半成品，木材含水率不得超过12%。加工的框和扇进场时应对型号、质量进行核查，需有产品合格证。
（2）其他材料：防腐剂、插销、木螺丝、拉手、锁、碰珠、合页按设计要求的品种、规格备齐。
2．主要机具
（1）电焊机、手电钻。
（2）大刨、二刨、小刨、裁口刨、木锯、斧子、扁铲、木钻、丝锥、螺丝刀、钢水平、凿子、钢锉、钢尺。
3．作业条件
（1）结构工程和有关壁柜、吊柜的构造连体已具备安装壁柜和吊柜的条件，室内已有标高水平线。
（2）壁柜框、扇进场后及时进行加工并靠墙、贴地、顶面应涂刷防腐涂料，其他各面应涂刷底油一道，然后应分类码放平整，底层垫平，保持通风，一般不应露天存放。
（3）壁柜、吊柜的框和扇，在安装前应检查有无窜角、翘扭、弯曲、劈裂，如有以上缺陷，应修理合格后，再行拼装。吊柜钢骨架应检查规格，有变形
Cards on the table contents:
Cabinets, hanging cabinet installation
The technical disclosure for general construction and hotel building cabinets, hanging cabinet installation.
1. Material requirements
(1) cabinets, wood hanging cabinet, or semi-finished products from the factory, wood moisture content should not exceed 12%. Processing comes into the box and fan response model, the quality of verification, the need for product certification.
(2) Other materials: preservatives, bolt, wood screws, handles, locks, touch beads, hinge according to design requirements of the varieties, specifications get ready.
2. Major equipment
(1) welding machines, hand drills.
(2) a large plane, two plane, small plane, cut mouth planing, wood saw, axes, flat shovel, wood drill, tap, screwdriver, steel level, chisel, steel file, steel rule.
3. Operating conditions
(1) structural engineering and the cabinet, hanging cabinet piece has been the construction of installation of cabinets and hanging cabinet with the condition, interior has elevation level.
(2) cabinet box fan after the timely processing of admission and the wall, paste, the top anti-corrosion coating to be brush, brush the other side should be a base oil, and should be classified laying is flat, the bottom level up, to keep Ventilation should not generally open storage.
(3) cabinet, hanging cabinet box and the fan, before the installation check for channeling angle, Alice twisting, bending, splitting, if these defects should be repaired after passing the re-assembly. Should check the specifications of steel skeleton hanging cabinet, there is a deformation