室内气体消防灭火系统安装技术交底-北京建工集团.doc

1  范围
    本工艺标准适用于民用和一般工业建筑中设置的二氧化碳灭火系统，卤代烷1211、1301灭火系统的管道及设备安装。
2  施工准备
    2.1  接到任务后，认真熟悉施工图纸，对照装修图并结合施工现场检查管路及喷嘴位置是否相吻合，如存在问题，应及时与设计协商解决并办理洽商手续。根据工程特点确定施工方法，配备所需各项资源。
    2.2  设备材料：
    2.2.1  消防气体灭火系统主要设备材料的选用应符合6一1"消防工程安装的通用要求"的有关内容。
    2.2.2  主要设备：灭火剂储存容器及系统组件包括单向阀、容器阀、选择阀、阀驱动装置和喷嘴等。这些系统组件均应给国家质量监督检测中心检测合格。系统中
1 Scope
    This technology is applicable to civil and general industrial buildings set carbon dioxide fire extinguishing systems, Halon fire extinguishing system 1211,1301 pipe and equipment installation.
2 construction preparation
    2.1 After receiving the task seriously familiar with the construction drawings, control construction site fitting-out plans and combined piping and nozzle checking whether location of match, such as problems should be resolved through consultation and design time and go through the negotiation process. Determined based on the engineering characteristics of construction method, with the resources required.
    2.2 Equipment and Materials:
    2.2.1 The main fire gas fire extinguishing system should comply with the selection of equipment and materials 6 1 1 "to install the Universal fire engineering requirements" of the content.
    2.2.2 Main Equipment: fire extinguishing agent storage container and system components, including a one-way valve, the container valve, selector valve, valve actuators and nozzle so. The system components should be addressed to the State Quality Supervision and Inspection Center qualified. System