工程试验资料汇编.doc

目     录
一、常用建筑材料送样要求
二、有关钢筋牌号、性能、等级等
三、钢材直径与截面积表
四、螺旋道钉锚固用料与工艺
五、有关硫磺锚固的参考资料
六、泥浆试验操作要点
七、砼配合比设计参数参考表
八、混合砂浆配合比设计参数参考表
九、水泥砂浆配合比设计参数参考表十、砼配合比设计中基本参数的选取
十、砼铁路强度评定标准（TB10425-94）
十一、数据修约规则〈GB8170—87〉
十二、每一试验项目所需碎石或卵石、砂的最少取3样数量〈kg〉
十三、合理砂率值的选用
十四、碎石或卵石的颗粒级配范围
十五、砂颗粒级配区
CONTENTS
A commonly used building material sample required
Second, the steel grade, performance, class, etc.
Third, the diameter and cross-sectional area of steel sheet
4, screw spike anchoring material and process
5, the sulfur anchor reference
6, mud test operation points
7, concrete mix design parameters reference tables
8, mixed mortar mix design parameters reference tables
9, cement mortar mix design parameters of reference tables 10, concrete mix design in the selection of basic parameters
10, concrete strength evaluation standard rail (TB10425-94)
11, data rounding rules <GB8170-87>
12, required each pilot project gravel or pebbles, sand the least number of samples taken 3 <kg>
13, a reasonable value of the selected sand ratio
14, crushed stone or gravel of particle size distribution range
15, sand grain size distribution area