房屋建筑施工图审查人员资格培训讲义（结构）.rar

房屋建筑施工图审查人员资格培训讲义 （结构）

第一讲 建筑工程结构施工图设计文件编制深度要求 
1.1 在施工图设计阶段，结构专业设计文件应包括结构计算书和设计图纸。结构计算书用于内部归档和施工图审查。
1.2 结构计算书 
1.一般情况下，结构计算书应有手算和电算两部分内容，较简单的工程也可仅有手算计算书。
2.采用手算的结构计算书，应给出构件平面布置简图和计算简图；内容应完整、清楚、整洁、计算步骤要条理分明，引用数据要有可靠依据，引用的图表和计算公式应注明来源，构件的编号、计算结果应与图纸一致。 
3.用电算时，应在计算书中注明所采用的计算程序名称、代号、版本及编 制单位，计算程序必须经过有效鉴定，电算结果应经分析判断认可，总体输入信息、几何简图、荷载简图、配筋简图及各种计算结果输出应整理成册。 
4.用标准图时，应根据图集的说明，结合工程进行必要的核算和选用工作。 
5.采用重复利用图时，应根据工程实际，尤其是地基情况进行必要的核算和修改。 
6.所有的计算书应校审（留有校审痕迹），整理成册，设计、校对审核人分别在计算书封面上签字，并加盖设计单位公章。
1.3 图纸目录 
应按图纸序号排列，先列新绘制图纸，后列选用的重复利用图或标准图，在目录的首页上应有项目和专业负责人、设计人的署名及签字。 
1.4 设计说明 
每一单项工程应编写一份设计总说明，多子项工程宜编写统一的设计总说明。简单的小型单项工程，设计总说明的内容可分别写在基础平面图和结构
Housing construction plan review the qualifications of training notes (structure)

The first lecture construction design building structures to compile the documents required
1.1 In the construction design stage, the structure of professional design document should include structural calculations and design drawings. Structural calculations and construction plans for review within the archive.
1.2 Structural calculations
1. In general, structural calculations should be hand written and computer computation and two parts, simpler construction can be considered only hand calculations.
2. Using hand-counted structure calculations, should be given in component layout diagrams and calculation diagram; content should be complete, clear, clean, calculated steps to be coherent and have a reliable basis for reference data, reference charts and formulas should indicate the source, component number, the results should be consistent with the drawings.
3. Electricity operator should be used in the calculation of the calculation of the book indicate the program name, code, version, and the preparation of units, calculation procedures must be effectively identified, Computer results should be approved by the judge for the overall input, simple geometry maps, load diagrams, schematic and a variety of results reinforced the output should be finishing a book.
4. With a standard layout, the description should be based on Atlas, combined with the necessary engineering and selection of accounting work.
5. By repeated use of graphs, should be based on engineering practice, especially in the foundation to conduct the necessary accounting and modification.
6. All calculations shall review school (school leaving examination marks), organize into a book, design, proof-reading the book review in the calculation of the cover respectively to sign and affix the official seal and design units.
1.3 Drawing List
Drawing number should be arranged in the first series of new drawings, selected after a series of re-use plans or standard drawings, should be in the directory's home page on the project and the professional head of the designer's signature and the signature.
1.4 Design Notes
Each individual project should be designed to prepare a general note, many sub-projects should develop a uniform work process. Simple, small individual projects, the design shows the contents of the total respectively in the basic layout and structure of written