综合楼室内装饰工程施工组织设计(详细).doc

施工组织设计
目录
第一章 工程概况 ８
1.1工程概述 ８
1.2 施工工期及工程质量标准 ８
1.3 施工组织设计编制依据 ８
1.4编制原则 １０
1.5编制说明 １１
第二章 施工指导思想及准备 １２
2.1 项目施工准备 １２
2.1.1技术准备 １２
2.1.2施工队伍进场准备 １３
2.1.3对各专业工人技术水平要求 １３
2.1.3.1对工人素质的控制措施 １４
2.1.3.2拟用于本工程各专业施工班组及相关管理措施 １５
2.1.3.3对各专业工人技术水平要求 １６
2.1.4工人进场的管理 １８
2.1.5地盘准备 １９
2.1.6装修材料准备 ２０
2.1.7对材料质量的进场控制 ２０
2.1.8主要材料进场计划 ２５
2.2临时设施布置方案 ２６
2.3 拟投入的施工机械设备配置 ２６
2.3.1拟投入的主要施工机械设备表 ２７
2.3.2拟投入本工程主要检测设备表 ２８
2.3.3施工工具的保管、发放、维修保障措施 ２９
2.4 本工程劳动力配置及进场时间安排 ２９
2.5 劳动力计划表 ３０
第三章 施工方案 ３１
3.1 施工工序 ３１
3.2 主要项目的施工工艺及技术交底 ３１
3.2.1天棚工程 ３１
3.2.1.1轻钢龙骨石膏板吊顶施工 ３１
3.2.2.2轻钢龙骨微孔铝扣板天花吊顶施工 ３３
3.2.2墙柱面装饰工程 ３３
3.2.2.1墙面砖施工 ３３
3.2.2.2干挂石材施工 ３６
3.2.2.3木装修墙工程施工 ３７
3.2.2.4墙纸施工 ３８
3.2.2.5立柱不锈钢、喷漆玻璃饰面施工 ４１
3.2.2.8玻璃隔断制安工程 ４２
3.2.3地面装修工程 ４３
3.2.3.1地砖铺装施工 ４３
3.2.3.2石材地面施工 ４５
3.2.3.3实木地板面层施工 ４６
3.2.3.4复合木地板施工 ４７
3.2.3.5楼面地胶铺贴施工 ４９
3.2.5乳胶漆施工工艺 ５０
3.2.6金属板加工及安装 ５１
3.2.7门窗工程施工 ５３
3.2.8木饰面油漆施工 ５５
3.2.9电气照明综合布线工程 ５６
3.2.9.1施工顺序 ５６
3.2.9.2电气管线敷设 ５７
3.2.9.3电线管穿线 ５７
3.2.9.4电缆敷设 ５８
3.2.9.5配电箱安装 ５８
3.2.9.6照明器具安装 ５８
3.2.9.7系统调试方法 ５９
3.2.10给排水安装工程 ５９
3.2.11直饮水工程专项施工方案 ６１
3.2.11.1概述 ６１
3.2.11.2设计思路 ６１
3.2.11.3施工部署 ６２
3.2.11.4技术要求及施工方法 ６３
3.2.11.5质量安全措施 ６７
3.2.11.6主要设备材料清单表 ６８
3.2.12防白蚁施工 ７３
3.2.13卫生间、厨房防水处理 ７４
3.2.14停车场设施安装工程 ７６
第四章 施工进度计划 ７７
4.1施工进度计划 ７７
4.2工程开竣工日期 ７８
4.3进度计划与工期安排协调 ７８
4.3.1进度控制顺利执行的条件 ７９
4.3.2编制施工进度表 ８０
4.4确保工期措施 ８１
4.5违约承诺 ８７
第五章 质量保证措施 ８８
5.1工程质量标准及承诺 ８８
5.2工程项目质量管理体系 ８９
5.3工程质量保证措施 ８９
5.4质量管理职能 ９０
5.5半成品及成品保护措施 ９０
5.5.1保护职责 ９０
5.5.2保护方法 ９１
5.6质量通病预防治措施 ９３
5.6.1石材地面接缝不平，板面纹理不顺、色泽不匀 ９３
5.6.2瓷砖墙面空鼓、脱落 ９４
5.6..3瓷砖接缝不平直、缝子不均匀，踢脚线出墙厚度不一致 ９５
5.6.4木纹不顺，饰面不平 ９６
5.6.5面层明钉缺陷 ９７
5.6.6木龙骨安装缺陷 ９８
5.6.7油漆流坠 ９９
5.6.8窗扇关闭渗水 １００
5.6.9坐便器安装后渗漏、不稳 １００
第六章 安全生产保证措施 １０２
6.1 安全生产保证措施 １０２
6.2 项目安全管理体系 １０３
6.2.1 项目经理职责 １０３
6.2.2 施工队队长安全生产责任 １０４
6.2.3 施工队及工地安全员的安全生产责任 １０４
6.2.4 班组长（施工承包人）的安全生产责任 １０６
6.2.5 工地质量员的安全生产责任 １０７
6.2.6 工地材料员安全职责 １０７
6.2.7 工人的安全职责 １０８
6.2.8 实行安全教育培训制度 １０９
6.2.9 安全技术交底制度 １１１
6.2.10 刷(喷)浆工程安全技术交底 １１２
6.2.11 油漆工程安全技术交底 １１２
6.2.12 圆锯使用安全技术交底 １１３
6.2.13电焊工安全技术交底 １１４
6.2.14 电工安全技术交底 １１５
6.2.15 特种作业人员持证上岗制度 １１６
6.2.16 项目组安全检查制度与实施细节 １１７
6.2.17 班前安全活动制度 １１９
6.2.18 工伤事故报告处理规定 １１９
6.2.19 施工现场防火规定 １２１
6.2.20 施工现场用电管理规定 １２２
6.2.21 施工现场临时用电规定 １２４
6.3安全事故预防措施 １２５
6.4消防管理措施 １２６
6.5安全用电技术措施 １２７
6.6现场安全、保卫 １２９
第七章 文明施工措施 １３１
7.1 材料堆放管理 １３２
7.2 工地环境条件保护 １３３
7.3 生活区环境条件保护 １３３
7.4 文明施工改善措施 １３３
7.5 环境保护措施 １３４
7.6 噪声控制与粉尘控制措施 １３４
第八章 交叉作业与协调管理 １３５
8.1交叉作业管理 １３５
8.2与业主、监理、设计等单位合作关系处理 １３６
8.2.1与业主的关系处理 １３６
8.2.2与监理具体工作程序 １３７
8.2.3与设计单位的合作关系处理 １３８
8.3施工内外组织协调 １３８
第九章 文件、资料管理及归档 １４１
第十章 工程回访和保修 １４２
10.1工程保修 １４２
10.2工程回访 １４３
10.3保修服务承诺 １４４
第十一章 合理化建议 １４５

Construction Design
Directory
Project Overview Chapter 8
1.1 Project Overview 8
1.2 The quality of the project construction period and the Standard 8
1.3 Construction organization design based on 8
1.4 Basis of preparation of 10
1.5 shows the preparation of 11
Chapter 12 Construction and preparation guidelines
2.1 Project Construction to prepare 12
2.1.1 Technical Preparation 12
2.1.2 Construction of team approach to prepare 13
2.1.3 of the technical standards of professional workers in 13
2.1.3.1 Quality control measures for workers 14
2.1.3.2 to be used in the construction of this project to the professional management team and the related 15
2.1.3.3 on the technical standards of professional workers in 16
2.1.4 Management approach 18 workers
2.1.5 Site preparation 19
2.1.6 decoration materials to prepare 20
2.1.7 The approach to the material quality control 20
2.1.8 25 major material approach plan
2.2 Layout of 26 temporary facilities
2.3 to be configured into 26 construction machinery and equipment
2.3.1 The main construction to be put into machinery and equipment Table 27
2.3.2 The works to be put into the main testing equipment Table 28
2.3.3 construction tool storage, issuance, maintenance and support measures 29
2.4 The project labor allocation and scheduling approach 29
2.5 Labor 30 schedule
Chapter 31 construction program
31 3.1 Construction process
3.2 Construction of major projects and technical disclosure process 31
3.2.1 ceiling Engineering 31
3.2.1.1 plasterboard ceiling metal frame construction 31
3.2.2.2 Micro Lvkou Ban ceiling metal frame construction 33
3.2.2 cylinder wall decoration 33
3.2.2.1 Construction of 33 wall tile
36 3.2.2.2 Construction of Dry Stone
3.2.2.3 Construction of 37 wood-paneled wall
3.2.2.4 Construction of 38 wallpapers
3.2.2.5 Column stainless steel, paint finish construction of 41 glass
3.2.2.8 glass partition system safety engineering 42
43 3.2.3 Surface decoration
3.2.3.1 Brick Pavement 43
3.2.3.2 Construction of 45 ground stone
3.2.3.3 Surface Construction 46 solid wood flooring
3.2.3.4 Construction of composite wood flooring 47
3.2.3.5 Construction of the floor to glue Paving 49
Construction Technology 50 3.2.5 Paint
3.2.6 Metal plate processing and installed 51
3.2.7 door construction 53
3.2.8 Construction of 55 wood finishes paint
3.2.9 electrical lighting cabling engineering 56
3.2.9.1 Construction of the order of 56
3.2.9.2 laying of electrical lines 57
3.2.9.3 wire pipe threading 57
3.2.9.4 Cabling 58
3.2.9.5 Distribution box installation 58
3.2.9.6 Lighting Installation 58
3.2.9.7 system debugging method 59
3.2.10 for the installation of 59 drainage
3.2.11 Drinking Water Project Construction Scheme 61 special
3.2.11.1 Overview 61
3.2.11.2 design idea 61
3.2.11.3 Construction of the deployment of 62
3.2.11.4 63 technical requirements and construction methods
3.2.11.5 quality of safety measures 67
3.2.11.6 List of major equipment and materials Table 68
3.2.12 Construction of 73 termite
3.2.13 bathroom, kitchen, water treatment 74
3.2.14 installation of 76 car-parking facilities
Chapter 77 Construction Schedule
77 4.1 Construction Schedule
4.2 Project commencement and completion date of 78
4.3 The schedule and duration of the coordination arrangements 78
4.3.1 the conditions for the successful implementation of the progress of control 79
4.3.2 the preparation of the construction schedule of 80
Measures to ensure the schedule of 4.4 81
Breach of promise 87 4.5
Chapter 88 Quality assurance measures
5.1 Project quality standards and commitment to 88
5.2 Project Quality Management System 89
5.3 Project Quality assurance measures 89
5.4 Quality management functions 90
Semi-finished and finished products 5.5 90 protection
5.5.1 Protection of duty 90
5.5.2 Protection Methods 91
Governance measures to prevent quality problems 5.6 93
5.6.1 uneven stone floor joints, board texture flow, and color unevenness 93
5.6.2 tile wall void, or off 94
5.6 .. 3 ceramic tile joints are not straight, Nuiko uneven, the wall thickness of the baseboard 95 is inconsistent
5.6.4 grain flow, uneven finishes 96
5.6.5 Surface defects in 97 out nails
5.6.6 Installation of wood keel defects 98
5.6.7 paint flow fall 99
5.6.8 sash closed seepage 100
5.6.9 Toilet leaks after installation, unstable 100
Chapter 102 of safety assurance measures
Safety assurance measures 6.1 102
6.2 Project Safety Management System 103
6.2.1 Project Manager role 103
6.2.2 Construction Safety Team captain responsibilities 104
6.2.3 Construction site safety team and the safe production responsibility for 104 staff
6.2.4 team leader (construction contractor) responsibility for the safe production of 106
6.2.5 Members of the site quality and safe production responsibility 107
6.2.6 Members of the security responsibilities of the site materials, 107
6.2.7 the security responsibilities of 108 workers
6.2.8 the implementation of safety education and training system 109
6.2.9 Security System 111 Technology Details
6.2.10 brush (spray) 112 pulp Engineering Safety Technology Details
6.2.11 Paint Engineering Safety Technology Details 112
6.2.12 safe technical disclosure of 113 circular saw
6.2.13 114 welders Security Technology Details
6.2.14 Electrical Safety Technology Details 115
6.2.15 special operations personnel licensing system for 116
6.2.16 project team and implementation details of the security inspection system 117
6.2.17 system safety activities before classes 119
6.2.18 reports dealing with provisions of 119 accidents
6.2.19 121 construction site fire safety requirements
6.2.20 Power Management provides construction site 122
6.2.21 Power provides 124 temporary construction site
6.3 Safety measures for accident prevention 125
6.4 Fire management 126
6.5 Safety Measures Power 127
6.6 site security, security 129
Construction of measures under Chapter VII of Civilization 131
7.1 Materials Management 132 stacked
7.2 site environmental conditions to protect 133
7.3 Living environment protection zone 133
7.4 civilized construction improvements 133
134 7.5 Environmental Protection Measures
7.6 Noise control and dust control measures 134
Chapter VIII of the cross-operating with the coordination and management 135
8.1 Cross Operations Management 135
8.2 with the owners, supervision, design partnership deal with 136 units
8.2.1 deal with the relationship with the owners of 136
8.2.2 Specific procedures and supervision 137
8.2.3 and design partnership deal with 138 units
8.3 Construction organization and coordination within and outside the 138
Chapter IX documents, data management and archiving 141
Re-engineering and warranty Chapter 142
10.1 Engineering 142 warranty
Re 143 10.2 Engineering
10.3 144 warranty service commitment
Chapter XI 145 rationalization proposals