中关村软件园起步区土建工程施工组织设计.doc

第一章  工程概况

    1.1  工程概况
本工程为北京中关村软件园起步区工程一阶段合同（包括会展中心及管理中心工程），总占地面积15394.2 M2，由机械工业部设计研究院设计，其设计有关情况如下表：
会展中心及管理中心工程概况：
建筑面积 会展中心:21000 m2 /管理中心:12000 m2
檐高 12m
层数 地上三层，地下一层
结构形式 轻钢结构
砌筑工程 红机砖/陶粒砌块
门窗工程 塑钢门窗及铝合金门窗
外装修 铝塑复合板幕墙/铝合金玻璃幕墙
内装修 楼面为橘红大理石及宝山红花岗岩
 隔断墙为轻钢龙骨双面石膏板
 吊顶为轻钢龙骨纸面石膏板
防水工程 SBS卷材防水/氯丁胶卷材防水
砼强度设计 垫层C10，结构C30
基   础 独立基础
    钢结构工程概况:综合管理中心1115吨，会展中心1305吨，整个结构型式为框架结构，两个建筑是三层结构。其中综合管理中心占地7
Chapter Project Overview

    1.1 Project Overview
The project started in Beijing Zhongguancun Software Park, a stage on engineering contracts (including the Convention and Exhibition Centre and Management Centre project), the total area of 15394.2 M2, by the Ministry of Machine Design and Research Institute design, the design of the situation following table:
Convention and Exhibition Centre and Management Centre Project Overview:
Convention Center construction area: 21000 m2 / Management Center: 12000 m2
Eave height 12m
Three layers of the earth, ground floor
Light steel structure
Project Red Machine brick masonry / ceramic block
Plastic doors and windows and aluminum windows and doors windows and doors project
Outer wall decoration ACP / aluminum curtain walls
Interior decoration and marble floor for the orange red granite Baoshan
 Double wall partition gypsum board for the light steel keel
 Ceiling plaster board for the light steel keel
SBS waterproofing membrane waterproofing / chloroprene rubber waterproof membrane
Cushion design concrete strength C10, C30 structure
Independent foundation based
    Steel Works Profile: Integrated Management Center 1115 tons, 1305 tons Convention and Exhibition Centre, the whole structure type for the frame structure, the two buildings is three-tiered structure. Integrated management center which covers an area of 7