您现在的位置:主页 > 岩土 > 安全文明 > >>

广州南沙开发区工程沉管灌注桩安全技术交底.doc

资料评价:
★★★☆☆
更新时间:
2010-07-20
下载要求:
注册会员
文档大小:
0.01 MB
授权方式:
共享资料
上传会员:
zly1911
文档类型:
.doc
所属栏目:
安全文明
需要金币:
1
资料语言:
简体中文
资料简介:免费注册 本站会员可得金币,更多赚积分方法请查看:积分说明 下载地址

交底内容:
1.施工现场应按项目部规定的位置安放施工机械和堆放材料,各种材料按照规范要求堆放。
2.凡施工期间需要动火作业时,参加动火作业人员必须严格执行动火安全规定,在动火前做好“八不”,在动火中做好“四要”,在动火后做好“一清”工作。
3.应遵守项目部的安全守则、安全管理规定。
4.各种机械设备悬挂操作规程牌,施工前应检查管节与桩冒联接是否牢靠,桩尖分瓣是否灵活.所有机械与平台应平稳。
5、各施工班组现场应设防火负责人,负责本班所在区域的防火工作,并要经常检查、督促本班组人员做好防火工作。
6.进入施工现场,必须遵守文明施工安全劳动卫生规章制度。
7.进入施工现场,必须按规定正确穿戴,使用安全帽、安全带、工作鞋等个人劳动防护用品,无关人员不得进入施工区域。
8.施工区域内不准赤脚、赤膊,不准穿拖鞋、高跟鞋,高处作业不准穿破底鞋和带钉易滑鞋。
9.不准酒后施工、操作。
10.不准擅自损坏、拆除、移动安全防护装置、警示牌、安全标志。
11.按规定正确使用安全“三宝”。
12.在工棚宿舍内不准使用电炉、电热棒等非生产性电加热器具。
13.在工棚宿舍内不准躺在床上吸烟,禁止乱扔烟头、火种。
14.施工作业区及人行道与高压电线等的距离要符合安全距离。
15.各种用电和照明线路由电工架设,采用TN-S系统三相五线制,并配备过载和漏电保护装置。
16.所有施工人员均应掌握安全用电基本知识和所用设备性能,施工用电设备专人使用,用电人员各自保护好自用设备的负荷、地线和开关箱,发现问题及时找电工解决,严禁非使用人员擅自使用电气设备,不用时切断电源。
17.配电系统分级配电,配电箱、开关箱外观完整、牢固、防雨防尘、外涂安全色(标),统一编号;其安装形式、内设必须符合有关规定;箱内电器可靠、完好、选型、定值符合规定并标明用途。
17、各种桩机要有专人负责维修、保养,并经常对机械运行的关键部位进行检查,预防机械故障及机械伤人。
18、桩机使用时操作员要密切注意机上的仪器、仪表、指针是否超出安全范围,机体是否有异常振动及发出异响,出现问题及时停机处理,不得擅离职守、隐瞒不报。
19、小范围内机械与机械、机械与人同时工作时应协调配合,相互保持安全距离。
Cards on the table contents:
1. Construction site should be placed in the location of the project provides for construction machinery and stacking materials, a variety of materials piling up in accordance with specifications.
2. Where the need for Hot Work during the construction period, participants must strictly enforce the Hot Work Hot Work safety requirements, well before the hot work "eight do not" do well in hot work in "four to", after the hot work make "a clear" work.
3. Shall comply with the safety of the Department of Code projects, safety regulations.
4. All kinds of machinery and equipment operating rules hanging signs should be checked before construction pipe section is connected with the pile to take strong, it flexibility in the split pile tip. All mechanical and platform should be stable.
5, the construction team on-site person in charge should be set fire, charge of the class where the region's fire prevention work, and to regularly inspect and supervise the team personnel in fire prevention.
6. Into the construction site, must comply with the labor hygiene and civilized construction safety regulations.
7. Into the construction site, must be required to wear the correct use of safety helmets, safety belts, work shoes and other personal protective equipment work, unrelated persons allowed to enter the work area.
8. Construction of the region are not allowed to bare feet, bare, not allowed to wear slippers, high heels, clogs and worn in high places are not allowed to bring nail slippery shoes.
9. Not allowed to drink the construction, operation.
10. No unauthorized damage, removal, mobile security guards, warning signs, safety signs.
11. In accordance with the provisions of the proper use of safety "Sambo."
12. Dormitory in the shed are not allowed to use the electric stove, electric rods and other non-production electric heating appliances.
13. In the shed are not allowed to lie on the bed dormitory smoking ban throw cigarette butts, fire.
14. The construction work areas and walkways and high-voltage wire, etc. to comply with a safe distance away.
15. All power and lighting circuits set up by the electrician, TN-S system using three-phase five-wire system, and equipped with overload and leakage protection device.
16. All construction personnel should be to master the basic knowledge and safety of electric equipment used in performance, construction hand power equipment use, electrical workers protect their own personal use equipment, load, ground and switch boxes, find an electrician to solve the problem in a timely manner, is strictly prohibited unauthorized use of non-use of personnel electrical equipment, turn off the power when not in use.
17. Distribution system classification and distribution, power distribution box, switch box looks full, strong, rain, dust, applied externally safe color (standard), uniform numbers; its installation form, equipped to meet the requirements; box Electric reliable, good, selection, value and indicate compliance purposes.
17, need all kinds of pile driver specifically responsible for repair, maintenance, and often the key parts of the machine running checks, to prevent mechanical failure and mechanical wounding.
18, pile driver operators use to monitor the plane's instruments, meters, indicators are beyond the safe range, the body is abnormal vibration and abnormal noise issue, stop dealing with problems in a timely manner, shall not be absent from duty, it hidden.
19, small-scale machinery and machinery, machinery and people at the same time work should be coordinated with each other to keep a safe distance.
 

帮助 收藏 报错 评论>>
广州南沙开发区工程沉管灌注桩安全技术交底下载
点击此处下载