壁柜、吊柜安装施工工艺.doc
1. 范围
本工艺标准适用于一般建筑和宾馆建筑壁柜、吊柜安装工程。
2. 施工准备
2.1 材料及构配件
2.1.1 壁柜、吊柜制品由工厂生产成成品或半成品,木材制品含水率不得超过12%。加工的框和扇进场时,应核查型号、质量,验证产品合格证。
2.1.2 其他材料:防腐剂、插销、木螺丝、拉手、锁、碰珠。合页等,按设计要求的品种、规格、型号备购。
2.2 主要机具:
2.2.1 电动机具:电焊机、手电钻、小台锯。
2.2.2 手用了具、大刨、二刨、小刨、裁口刨、木锯、斧子、扁铲、木钻、丝锥、螺丝刀、钢锯、钢水平、凿子、钢挫、钢尺。
2.3 作业条件。
2.3.1 结构工程和有关壁柜、吊柜的连体构造已具备安装壁柜和吊柜的条件,室内已有标高水平线。
1. Scope
This technology is applicable to general construction and hotel building cabinets, hanging cabinet installation.
2. Construction preparation
2.1 Materials and components and parts
2.1.1 cabinets, hanging cabinet products from the plant into finished or semi-finished products, wood products shall not exceed 12% moisture content. Processing comes into the box and the fan should check type, quality, and verify product certification.
2.1.2 Other Materials: preservatives, bolt, wood screws, handles, locks, touch beads. Hinge and so on, according to design requirements of the species, size, type equipment purchased.
2.2 Main equipment:
2.2.1 Motors with: welding machine, hand drill, a small table saws.
2.2.2 to use to a large plane, two plane, small plane, cut mouth plane, wood saw, axes, flat shovel, wood drill, tap, screwdriver, hacksaw, steel level, chisel, steel fell, steel rule.
2.3 Operating conditions.
2.3.1 Structural Engineering and the cabinet, hanging cabinet of the conjoined structure has been installed on cabinets and hanging cabinet with the conditions, interior elevation of the horizon has been.
帮助中心 收藏 >>> |
本类栏目导航
总点击排行
- 天正建筑2013最新64位破解版
- 173549次
- Autocad2013 64位32位破解版附带注册机
- 154873次
- 天正建筑8.5破解版
- 146385次
- autocad2012 64位32位 破解版(附注册
- 139022次
- 天正建筑8.2破解版
- 127265次
- autocad2010免费下载(简体中文版)
- 98144次
- 免费农村房屋设计图
- 90906次
- CAD2008注册机及使用说明
- 84340次
- 11g101图集全套下载
- 78882次
- cad图集大全
- 67445次
- 利用基础钢筋做接地极施工工艺流程框图
- 765次
- 卫生间地面细石混凝土找坡层(防水保护
- 735次
- 木饰面板及木作工程施工工艺
- 595次
- 玻璃采光顶工程施工工艺
- 527次
- 卫生间防水施工工艺
- 508次
- 屋面找平层施工工艺(1002-1996)
- 408次
- 轻钢龙骨石膏罩面板隔墙施工工艺标准(
- 406次
- JB4734附录B铝容器焊接工艺评定
- 403次
- 钻孔灌注桩施工标准工艺流程图
- 402次
- 004涂色镀锌钢板门窗安装工艺
- 402次