某市法院办公大楼装饰工程施工组织设计.doc

 目    录
编 制 说 明
一、 编 制 依 据
二、 工 程 概 况
三、 施工总平面布置图及说明
四、 施 工 准 备
1.现场准备
2.技术准备
3.劳动力准备
4.材料准备
5.机械设备准备
五、 施 工 部 署
1.工程项目组织机构：
2.各部门职责：
3.总体部署原则
4.施工协调管理
5.协调方式
6.施工垃圾处理
7.施工临时用水计划
8.施工临时用电计划
9．施工消防安全布置
10. 雨季施工措施
11. 夜间施工技术措施
12. 施工图完善及样板间制作
六、 工程施工计划及其说明
1.进度计划保证措施
2.施工进度计划横道图见附图三。
3.施工进度计划网络图见附图四。
4.技术工人需用计划（技术工人计划表）
5.主要材料供应计划
6.主要施工机械设备需用计划（拟投入本工程的主要施工机械表和拟配备本工程的主要材料试验、测量、质检仪器表）
7.节约计划(降低成本措施)
8.技术节约措施
七、 主要工程项目的施工程序和施工方法
1.总施工工艺流程
2.轻钢龙骨石膏板吊顶施工工艺
3.地面地砖、花岗石铺贴工艺
4.卫生间墙面砖镶贴工艺
5.墙面花岗石干挂施工工艺
6.细木制品施工工艺
7.油漆工程施工工艺
8.墙面、天花乳胶漆工程施工工艺
9.墙纸粘贴施工工艺
10.地毯铺贴施工工艺
11.不锈钢楼梯栏杆施工工艺
12.电气工程安装施工工艺
13.给、排水及卫生洁具安装施工工艺
14.脚手架工程
15. 织物软包墙施工工艺
16. 拟在本工程中采用的新材料和新工艺
16.1石英纤维壁布乳胶漆
16.2铝方扣板、铝条扣板吊顶施工工艺
16.3金属表面喷漆施涂工艺
16.4卫生间防水工程施工工艺
八、 工程质量管理目标
1.质量方针
2.质量目标
2.施工过程中为业主提供的服务
3.施工后期为业主提供的服务
3.工期目标
4.现场管理目标
5.创优计划
九、 工程质量保证措施
1.完善质量管理体系
2.施工准备阶段的质量控制
3.施工过程中的质量控制
4.施工技术文件、资料、信息管理
5.成品保护措施
6.质量通病及防治措施
十、 工程技术资料标准化管理措施
1.技术往来文件的管理措施
2. 技术往来文件的分类管理办法
3. 装饰公司在施工过程中应提交的书面通知和文件
4. 图纸资料
5. 表报监理记录
6. 工地会议
7. 竣工资料
十一、 文明安全施工措施
1.安全施工措施
2.临时用电措施
3.机械管理措施
4.消防保卫措施
5.现场管理措施
6.料具管理措施
十二、环保与环卫管理
1. 控制室内污染物氡（Rn-222）、甲醛、氨、苯和TVOC含量的措施
2. 环境污染保护整治措施
3. 防止扰民措施
十三、工程竣工验收与交工阶段质量控制措施
1. 工程的竣工与交工
2. 工程项目竣工验收的依据
3. 竣工验收程序
4.  竣工决算
十四、工期保证措施
十五、工程保修服务计划
1. 施工前期为业主提供的服务
２.施工过程中为业主提供服务
３.施工后期为业主提供服务
4.工程保修计划

CONTENTS
Compiled Description
1, compiled by far
Second, engineering Overview
Third, the total construction floor plan and description
4, construction and preparation
1. Site preparation
2. Technical Preparation
3. The labor to prepare
4. Materials prepared
5. Machinery and equipment to prepare
5, construction and deployment of
1. Project Organization:
2. The department responsibilities:
3. The general principles of deployment
4. Construction coordination and management
5. A coordinated manner
6. Construction waste
7. Construction of the temporary water plan
8. Construction of the temporary power plan
9. Construction fire safety arrangements
10. Rainy season construction measures
11. Night Construction Technology
12. Construction plans between sound and production model
6, construction plans and instructions
1. Schedule assurance measures
2. The construction schedule bar chart, see photo 3.
3. Construction schedule network diagram, see photo 4.
4. Skilled workers Xu Yong Plan (skilled workers, schedule)
5. Main materials supply plan
6. Xuyong plan major construction machinery and equipment (to be put into the project's main construction machines to be equipped with tables and the main material of this project test, measurement, quality inspection equipment list)
7. Savings plans (cost-cutting measures)
8. Technical conservation measures
7, major items of construction procedures and construction methods
1. The total construction process
2. Gypsum board ceiling metal frame construction technology
3. Ground floor tiles, granite paving process
4. Xiangtie Technology bathroom wall tiles
5. Granite hanging wall construction technology
6. Fine Wood Products Construction Process
7. Paint Construction Technology
8. Walls, ceilings and paint Construction Technology
9. Wallpaper paste construction technology
10. Carpet Laying construction technology
11. Stainless steel stair railing construction technology
12. Electrical Engineering Installation Process
13. To, drainage and sanitary ware Installation Process
14. Falsework
15. Fabric soft bag wall craft
16. To be used in the construction of new materials and new technology
16.1 quartz fiber wall covering paint
16.2 aluminum side wall panel, aluminum wall panel ceiling construction technology
16.3 metal surface spray apply a defined process
Construction Technology 16.4 Proofed
8, project quality management objectives
1. Quality Policy
2. Quality goals
2. Construction services for owners
3. Construction services to owners later
3. Duration target
4. On-site management objectives
5. Excellence program
9, quality assurance measures
1. Improve the quality management system
2. Quality control of construction preparation stage
3. Quality control during construction
4. Construction documents, data, information management
5. Finished product protection
6. Quality problems and control measures
10, engineering data management standardization
1. Technical exchanges between the management measures
2. Technical exchanges between the classification of management practices
3. Decoration company in the construction process should be submitted in writing and file
4. Drawing information
5. Supervision records in statement
6. Site Meeting
7. Completion data
11, civilization construction safety measures
1. Safety measures for construction
2. Temporary power measures
3. Mechanical management
4. Fire protection measures
5. Scene management
6. Materials with management measures
12, environmental protection and sanitation management
1. Control indoor pollutants Radon (Rn-222), formaldehyde, ammonia, benzene and TVOC content measures
2. Environmental protection treatment measures
3. To prevent the harassing
13, stage of completion inspection and quality control measures for Completion
1. Completion and Handing Over
2. The basis for final acceptance of project
3. Project acceptance procedures
4. Completion of final accounts
14, schedule assurance measures
15, project warranty service plan
1. Pre-construction services for the owners
2. The construction process to provide services to owners
3. Construction services to owners later
4. Works warranty program