颗粒砂浆保温(外饰为贴砖的)施工工艺.doc

颗粒砂浆保温(外饰为贴砖的)施工工艺

一、作业条件：
1、基层墙体的质量必须符合相关质量验收规范和标准要求，主体结构已验收，并办理四方验收手续。
2、脚手架和外用电梯安装完毕并通过验收。
3、外门窗通过验收并有相应成品保护措施。
4、外阳台部位电器暗管，接线盒安装完毕，外墙雨水管卡预埋完毕。
5、FIRST B.M体系正常施工温度5℃以上，风力超过5级或中雨以上天气不得施工。施工完毕后应防止阳光直晒。

二、主要材料与施工工具：
Particles mortar insulation (exterior for the tiling of the) construction technology

1, operating conditions:
1, the quality of primary wall must comply with the relevant norms and standards of quality acceptance, the main structure has been acceptance and acceptance procedures for handling the Quartet.
2, scaffolding and elevator installed by external inspection.
3, external doors and windows finished products through inspection and have the corresponding protection measures.
4, outside the balcony of electrical underground pipe, junction boxes installed, external rainwater pipes embedded cards completed.
5, FIRST BM system in normal working temperature of 5 ℃, wind more than 5 or moderate rain over the weather may not construction. After construction should prevent direct sunlight.

Second, the major materials and construction tools: