玻离安装工艺标准

1  范围
本工艺标准适用于工业与民用建筑铝合金框、扇及塑料框、扇的玻离安装工程。
2  施工准备
2．1  材料及主要机具：
2．1．1  玻璃：平板玻璃、磨砂玻璃、彩色玻璃、压花玻璃等品种、规格按设计要求选用，进场的玻璃必须有产品合格证。
2．1．2  橡胶压条，规格应符合设计要求。
2．1．3  密封胶的使用应符合设计要求，并应有产品合格证及使用说明。
2．1．4  氯丁橡胶垫片及铝合金垫片，根据需要准备。
2．1．5  玻璃胶的选用应与铝合金相匹配，并应有出厂合格证。
2．1．6  主要机具：工作台、玻璃刀、直尺、钢丝钳、毛笔、手动吸盘、电动真空吸盘、电动吊篮（安装玻璃幕墙）、运玻璃小车、钢卷尺、工具袋、抹布或棉丝、安全带、注胶枪等。

2．2  作业条件：
2．2．1  玻璃安装应在门窗五金已装好，交活
Glass from the standard installation process

1 Scope
This technology is applicable to industrial and civil aluminum frame, plastic box fan and fan of glass from the installation.
2 construction preparation
2.1 Materials and main equipment:
2.1.1 Glass: flat glass, frosted glass, stained glass, embossed glass and other varieties, chosen according to design requirements specification, entering the glass must have a product certificate.
2.1.2 rubber layering, specifications should be consistent with design requirements.
2.1.3 the use of sealants should meet the design requirements, and should product certificate and instructions.
2.1.4 neoprene gasket and aluminum gaskets, needed to prepare.
2.1.5 Selection of glass, plastic and aluminum should match and should have factory certification.
2.1.6 Main equipment: tables, glass cutter, ruler, wire cutters, brush, manual suction, electric vacuum suction, electric basket (installation of glass curtain wall), glass, car transport, steel tape measure, tool bags, cloth or cotton yarn, safety belts, injection plastic gun.

2.2 Operating conditions:
2.2.1 Installation of glass doors and windows should be in good hardware has been installed, pay live