江西省1709人防指挥所工程施工组织设计.doc

目    录
1. 编制说明……………………………………………………………
1.1编制目的………………………………………………………
1.2编制依据………………………………………………………
2.工程概况……………………………………………………………
2.1工程简介………………………………………………………
2.2工程特点………………………………………………………
3.项目管理目标及项目组织机构……………………………………
3.1项目管理目标…………………………………………………
3.2项目组织机构…………………………………………………
3.2.1项目部施工管理体制……………………………………
3.2.2项目管理机构……………………………………………
3.3安装项目组人员组成………………………………………
4.施工准备……………………………………………………………
4.1施工总平面布置……………………………………………
4.1.1施工平面布置原则……………………………………
4.1.2施工用电.用水准备……………………………………
4.1.3施工平面布置说明……………………………………
4.2技术准备
4.2.1交接准备……………………………………
4.2.2技术准备……………………………………
4.3劳动力资源准备
4.4物资准备
4.4.1材料的准备
4.4.2构(配)件.制品的加工准备
4.5主要施工机械.测试工具配备
5.电气工程施工方案
5.1电气工程简介
5.2施工流程
5.3低压配电设备安装工艺
5.3.1施工条件
5.3.2施工准备
5.3.3设备开箱检查
5.3.4柜(盘就位安装
5.5电缆桥架安装工艺
5.6电缆敷设工艺
5.7明,暗配管工艺
5.7.1线管暗敷
5.7.2线管明敷
5.7.2.1施工程序
5.7.2.2明配管路的施工方法
5.8电气照明灯具的安装工艺
5.9配电管,插座,开关安装工艺
5.9.1配电箱的安装
5.9.2开关,插座安装.
5.10电气试验和试运转
5.10.1一般要求
5.10.2低压配电盘柜及低压电气器
6中央空调工程施工方案及技术要求
6.1中央空调工程简介
6.2施工流程
6.3通风工程主要施工方案及技术要求
6.3.1安装流程
6.3.2风管支托吊架的安装
6.3.3风管的安装
6.3.3风阀的安装
6.3.4风口的安装
6.5空调设备安装
6.5.1新风机.空调器安装
6.5.2送,排风机安装
7给排水工程施工方案及技术要求
7.1给排水工程简介
7.2施工流程
7.4钢塑复合管安装工艺
7.4.1运输及贮存
7.4.2管材与管件的安装连接
7.4.3管道敷设
7.5卫生器具安装工艺
8.消防喷淋及消火栓系统施工方案及技术要求
8.1工程简介
8.2主要施工方案及技术要求
8.2.1管网安装
8.2.2喷头安装
8.2.3水流指示器安装
8.2.4水力警铃安装
8.2.5阀门及其附件的现场检验
8.2.6湿式报警阀安装
8.2.7泵等设备安装
8.2.8系统试压及冲洗
8.3合理代建议
9自动报警系统施工方案及技术要求
9.1工程简介及特点
9.2施工流程
9.3主要施工方案及技术要求
9.3.1布线
9.3.2水灾控制器的安装
9.3.3报警控制器的安装
9.3.4消防控制设备安装
9.3.5系统调试
10施工进度计划
10.1施工进度计划部署
10.2施工阶段划分
10.3各施工阶段主要工作内容
10.4主要进度控制节点
11工期保证措施
11.1科学合理的统筹和决策
11.1.1领导重视,组织保证
11.1.2实行计划管理与动态管理相结合
11.2施工配合协调
11.3集中力量,抓关键工序
11.4优化施工资源
11.4.1确保该工程的施工资金
11.4.2优化施工人员结构
11.4.3优化施工机具配置
11.4.4保证材料的供应
11.5做好检验和测试工作
12全过程质量控制及质量保证措施
12.1工程管理目标
12.1.1质量方针
12.1.2质量目标
12.2质量保证体系
12.3质量管理组织机构
12.4质量管理制度
12.4.1项目部管理人员职责
12.4.1.1项目经理职责
12.4.1.2项目技术负责人职责
12.4.1.3专业施工人员的职责
12.4.2文件和技术资料管理
12.4.3采购
12.4.4产品标识和可追溯性
12.5.施工过程质量控制
12.5.1施工准备阶段过程控制
12.5.2施工方法控制
12.5.3环境控制
12.5.4施工过程控制
12.5.4.1施工技术,质量交底
12.5.4.2材料控制
12.5.4.3技术评定准则
12.5.4.4 设备的维护,保养,验证
12.5.4.5关键工序
12.5.4.6分项工程检测
12.6施工工序活动效果的控制
12.6.1 工程工序质量活动控制步骤
12.6.2工程工序质量活动控制要点
12.7质量控制点
12.7.1通风工程质量控制点
12.7.2消防给水安装工程质量控制点
12.7.3泵类安装工程质量控制点
12.7.4保温质量控制点
12.7.5防腐工程质量控制
12.7.6电气安装工程质量控制点
12.8成品保护及交工验收
12.8.1成品保护
12.8.2交工验收
12.9保证措施
13安全施工保证措施
13.1安全管理目标
13.1.1安全方针
13.1.2安全目标
13.2现场安全管理机构
13.3安全管理制度
13.4安全教育
13.5安全检查
13.6安全技术保证措施
13.6.1常规施工安全措施
13.6.2施工所需的机电设备的安全事项
14文明施工保证措施

14.1对现场场容管理方面的要求14.2对现场机械管理方面的要求
14.3对现场生活卫生管理方面的要求
14.4环境保护保证措施
14.4.1防大气污染措施
14.4.2防止水污染措施
14.4.3防噪声污染措施
15技术及后期服务
CONTENTS
1. Preparation instructions ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
1.1 Purpose The ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
1.2 The preparation according to ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
2. Project Overview ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
2.1 Project Description ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
2.2 Project Characteristics ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
3. Project management objectives and project organization ... ... ... ... ... ... ... ... ... ... ... ... ... ...
3.1 Project Management Objectives ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
3.2 Project Organization ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
3.2.1 Ministry of Construction Project Management System ... ... ... ... ... ... ... ... ... ... ... ... ... ...
3.2.2 Project management institutions ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
3.3 Install project team composed of ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
4. Construction preparation ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
4.1 Construction of the general layout ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
4.1.1 Construction of layout principles ... ... ... ... ... ... ... ... ... ... ... ... ... ...
4.1.2 Construction of electricity. Water ready ... ... ... ... ... ... ... ... ... ... ... ... ... ...
4.1.3 Construction Layout Description ... ... ... ... ... ... ... ... ... ... ... ... ... ...
4.2 Technical Preparation
4.2.1 Handover preparation ... ... ... ... ... ... ... ... ... ... ... ... ... ...
4.2.2 Technical Preparation ... ... ... ... ... ... ... ... ... ... ... ... ... ...
Labor resources to prepare 4.3
4.4 Material preparation
4.4.1 Material preparation
4.4.2 Structure (with) no. Products processing to prepare
4.5 Main construction machinery. Testing tool with
5. Electrical engineering construction plan
5.1 Introduction of Electrical Engineering
5.2 Construction Process
5.3 Low Voltage Distribution Equipment Installation Technology
5.3.1 Construction Conditions
5.3.2 Construction of preparation
5.3.3 Equipment check out of the box
5.3.4 Cabinet (set in place to install
Install Process 5.5 cable bridge
5.6 Cabling Technology
5.7 and dark piping technology
5.7.1-ray tube Concealed
5.7.2-ray tube for surface
5.7.2.1 construction procedure
5.7.2.2 out with the construction method of piping
5.8 The electrical installation of lighting technology
5.9 distribution pipe, socket, switch installation process
5.9.1 Distribution box installation
5.9.2 switch socket.
5.10 Electrical testing and commissioning
5.10.1 General requirements
5.10.2 Low-voltage switchgear cabinets and low voltage electrical devices
6, Central air conditioning program and technical requirements of construction
6.1 Brief Introduction of the central air-conditioning
6.2 Construction Process
6.3 Ventilation engineering and technical requirements of the major construction program
6.3.1 Installation Process
6.3.2 Duct Installation Brackets and Hangers
6.3.3 Installation of duct
6.3.3 The air valve installation
6.3.4 Installation of outlet
6.5 Air conditioning installation
6.5.1 The new fan. Air conditioner installation
6.5.2 to send, exhaust fan installation
7 water supply and drainage construction program and technical requirements
7.1 Introduction to the drainage works
7.2 Construction Process
Steel-plastic Composite Pipe Installation Technology 7.4
7.4.1 Transport and storage
7.4.2 Installation of pipes and pipe fittings to connect
7.4.3 pipe laying
7.5 installation process sanitary ware
8. Fire sprinkler and hydrant system construction program and technical requirements
8.1 Project Description
8.2 The main construction program and technical requirements
8.2.1 Pipeline Installation
8.2.2 sprinkler installation
8.2.3 Flow indicator installed
8.2.4 Water alarm installation
8.2.5 Valves and accessories on-site inspection
8.2.6 Wet alarm valve installation
8.2.7 installation of pumps and other equipment
8.2.8 System pressure test and flushing
Reasonable on behalf of the proposed 8.3
9 automatic alarm system construction program and technical requirements
9.1 Project Introduction and Features
9.2 Construction Process
9.3 The main construction program and technical requirements
9.3.1 Cabling
9.3.2 installation of flood control
9.3.3 Installation of alarm controller
9.3.4 Fire control equipment installed
9.3.5 system debugging
10 Construction Schedule
10.1 Construction of the planned deployment schedule
10.2 Construction Stages
10.3 The main content of the construction phase
10.4 The main progress of the control node
11 schedule assurance measures
11.1 a scientific and rational planning and decision-making
11.1.1 leadership attention, organizational guarantee
11.1.2 planned combination of management and dynamic management
11.2 with the coordination of construction
11.3 concentrate, focus on key process
11.4 Optimization of construction resources
11.4.1 ensure that the money works
11.4.2 Optimization of the structure constructors
11.4.3 Optimization of construction equipment configuration
11.4.4 ensure that the supply of materials
11.5 Inspection and testing work well
12 whole process of quality control and quality assurance measures
12.1 The project management objectives
12.1.1 Quality Policy
12.1.2 Quality Target
12.2 Quality Assurance
12.3 Quality Management Organization
12.4 Quality Management System
12.4.1 Project management responsibilities of the Department of
12.4.1.1 Project Manager Responsibilities
12.4.1.2 Project Technical Leader responsibilities
12.4.1.3 Construction of the duty of professional
12.4.2 documentation and technical data management
12.4.3 Procurement
Product identification and traceability 12.4.4
12.5. Construction Quality Control
12.5.1 the construction preparation stage process control
12.5.2 Construction Method of Control
12.5.3 Environmental Control
12.5.4 Construction of process control
12.5.4.1 construction technology, quality cards on the table
12.5.4.2 Material Control
12.5.4.3 Technical evaluation criteria
12.5.4.4 equipment maintenance, maintenance, validation
12.5.4.5 key process
12.5.4.6 Detection of sub-projects
12.6 The effect of construction process control activities
12.6.1 engineering processes and quality control procedures activities
12.6.2 engineering processes and quality control points activities
12.7 Quality Control Points
12.7.1 Ventilation Engineering Quality Control Points
12.7.2 installed Fire Water Quality Control Points
12.7.3 pump installation quality control points
12.7.4 Insulation Quality Control Points
12.7.5 Corrosion Engineering Quality Control
Electrical installation 12.7.6 Quality Control Point
12.8 Completion Acceptance of product protection and
12.8.1 product protection
12.8.2 Completion Acceptance
12.9 assurance measures
Construction to ensure security measures 13
13.1 Safety management objectives
13.1.1 Security Policy
13.1.2 Safety Goals
13.2 on-site security management institutions
13.3 Safety Management System
13.4 Safety Education
13.5 Security Inspection
13.6 Security Technical Assurance Measures
13.6.1 General construction safety measures
13.6.2 Construction of mechanical and electrical equipment required for safety matters
14 Construction to ensure civilized measures
14.1 pairs field site content management requirements
14.2 pairs of field machinery management requirements
14.3 pairs of field life, health management requirements
14.4 Environmental assurance measures
14.4.1 Anti-air pollution measures
14.4.2 Measures to prevent water pollution
14.4.3 Anti-noise pollution measures
15 technical and post-service