钢结构及铁件制作工程安全作业交底.doc

内容摘要：
1、大锤、小锤的木把应质地坚实、安装牢固。
2、打锤时禁止手戴手套，二人打锤严禁相对站立。
3、多人抬材料和工件时要有专人指挥，精力集中，行动一致；互相照应，轻抬轻放，以免伤人，并应将道路清理好。
4、使用各种机械，要先进行各部检查，试运转正常，方可正式使用。
5、操作人员必须了解机械的性能及安全操作规程。
6、电焊工作地点5m以内不得有易燃、易爆材料。
7、为防止触电必须遵守有关电气安全规程。
8、气焊、电焊应遵守气焊安全操作规程，焊工必须持证上岗。
9、使用气焊、电焊时边上无监护人不得进行操作。
10、严禁操作人员在酒后进入施工现场作业。
11、每个工人进入施工现场都必须头戴安全帽。
12、班组如果因劳力不足需要再招新工人时，应事先向工地报告。
13、新工人进场后应先经过三级安全交底，并经考试合格后方可让其正式上岗。
14、新工人进场应具有四证，即：职业资质证、身份证、计划生育证和外来人口暂住证。
Abstract:
1, hammer, hammer texture of solid wood to be installed firmly.
2, playing hammer against wearing gloves, two dozen hammer relative standing is strictly prohibited.
3 people have carried material and workpiece hand command, focus and action; care of each other, Qingtai gently to avoid injury, and the road should be cleared.
4, using a variety of machinery, to conduct inspection departments, commissioning normal before they come to use.
5, the operator must understand the mechanical performance and safe operation.
6, welding 5m within the workplace may not flammable and explosive materials.
7, in order to prevent electric shock must comply with the relevant electrical safety regulations.
8, gas welding, welding safety welding shall comply with operational procedures, welders must hold relevant certificates.
9, using gas welding, electric welding when the guardian can not operate without the edge.
10, prohibited operators in the drink to the construction site work.
11, each worker entering the construction site must be wearing helmets.
12 team if the need to move because of a labor shortage of new workers, the report shall be submitted to the site.
13, after the admission of new workers should go through three security correspondent, and pass the examination before they can let the official posts.
14, the new approach should have four cards of workers, namely: professional qualification certificate, identity cards, birth certificates and residence permits.