1、3#墩脚手板铺设不规范－脚手板捆牢，铺齐。    
2、3#墩上下船不便利－护栏钢筋去掉一部分安装步梯及扶手。    
3、3#墩塔吊无限位器－安装限位器，试吊。    
4、3#墩塔吊下端梯子加长－加长。    
5、加固3#墩塔吊平台基础－抛片石、打混凝土。    
6、砸机有断钢丝绳现象－检查钢丝绳磨损程度，更换。    
7、车工班用铜丝代保险丝－改为保险丝。    
8、电闸刀无配盖－安装配盖。    
9、2#墩用电话线代照明用电线－更换电线。    
10、交通船在航行时经常有人站在船头上－设立禁止牌严禁站立在船头上。    
11、生产区电气开关经常跳闸－对电器线路进行彻底检查，确定隐患，对应整改。    
备注：航标灯设置，请指挥部解决。    
1,3 pier scaffold board to lay the non-standard - Scaffold board truss, shop Qi.
2,3 pier boat up and down is not convenient - to remove part of the steel guardrail installation step ladder and handrails.
3,3 pier crane unlimited digital device - install stopper, try hanging.
4,3 pier crane bottom of the ladder longer - longer.
5, reinforced 3 pier crane platform basis - and stones thrown, hit concrete.
6, smashing machine has broken rope phenomenon - Check wire rope wear, replace.
7, Cut class with a wire on behalf of the fuse - to fuse.
8, gates knife with no cover - installed with cover.
9.2 pier with telephone lines on behalf of the lighting wire - rewiring.
10, transport vessel at sea, often someone is standing on the bow - the establishment of standing against a license is strictly prohibited at the bows.
11, electrical switch production areas often trip - a thorough inspection of the electrical circuit to determine the risks, the corresponding rectification.
Notes: navigation light settings, headquarters address.