自动压刨机使用安全作业交底.doc

内容摘要：
1、 操作前应详细检查各部件，如有毛病应先修理校正，并调整好床面与刨刃的距离，进行试刨，合格后才能进行操作。
2、 每次吃刀深度不宜超过3mm。
3、 操作时上下手应站在机械侧面，上手送料时，手要远离滚筒。
4、 刨长料时，料要平直推进，不得歪斜，如走横时，应立即搬拨压滚闸，将滚台降落。
5、 如木料不走时，应用其它材料推送，不能用手推送，如成批生产，应连续送料。
6、 不同厚度的木料，严禁同时刨削，以免木料弹出伤人。
7、 应严格按规定选用保险丝，严禁随意改用代用品。
8、 木工机械必须实施二级漏电保护。
9、严禁操作人员在酒后进入施工现场作业。
10、每个工人进入施工现场都必须头戴安全帽。
11、班组如果因劳力不足需要再招新工人时，应事先向工地报告。
12、新工人进场后应先经过三级安全交底，并经考试合格后方可让其正式上岗。
13、新工人进场应具有四证，即：职业资质证、身份证、计划生育证和外来人口暂住证。
Abstract:
1, detailed inspection before operation of the various components, such as the correction of defects should be repaired first, and adjust the bed and the distance between the cutter blade, and proceeds to dig, after passing to operate.
2, each blade depth should not eat more than 3mm.
3, the operation should start with the time on the mechanical side of the stand, get started feeding, the hands should be away from the drum.
4, planing long expected, the material should be straight forward, not skewed, like walking on a horizontal, immediate pressure to move roll call gate, the rolling platform landing.
5, such as the wood does not go, the application of other materials, push, push hands can not, such as mass production, should be a continuous feed.
6, different thickness of wood, is prohibited while planing to avoid pop-up wood wounding.
7, the fuse should be used strictly according to regulations, free to switch to substitutes is prohibited.
8, woodworking machinery to implement the secondary leakage protection.
9, is strictly prohibited operators in the drink to the construction site work.
10, each worker entering the construction site must be wearing helmets.
11 team if the need to move because of a labor shortage of new workers, the report shall be submitted to the site.
12, after the admission of new workers should go through three security correspondent, and pass the examination before they can let the official posts.
13, the new approach should have four cards of workers, namely: professional qualification certificate, identity cards, birth certificates and residence permits.