黄阁东二路道路工程人行道砖铺砌技术交底.doc
交底内容:
1、 本工程人行道按照路面结构图(图号DL-6-02、DL-6-05、DL-6-06等)进行施工。
2、 人行道砖的颜色及铺砌样式应事先取得甲方单位的认可。
3、 人行道垫层采用6%水泥稳定石屑厚15cm,人行道砖使用的材料是:水泥混凝土机压彩色通透联体砖,规格为25×12.5×5cm。
4、 测量放线:
利用侧石为边线,放出中线;并约隔5m左右测放水平桩,以控制方向及高程。桉标高及中、边线纵横挂线,以挂线为依据铺砌。
5、 铺砌人行道砖时,先铺一层2cm厚的1:3水泥砂浆卧底层进行调平,再进行铺砌预制块彩砖。
6、 预制块铺好后,用水泥砂浆填灌板缝,并用灰匙捣插板缝至砂浆饱满。铺砌完成后即覆盖淋水养护。
7、 人行道根据设计图纸设置A型和B型无障碍通道,以及人行道盲道。
Cards on the table contents:
1, the project in accordance with the road pavement structure (Figure No. DL-6-02, DL-6-05, DL-6-06, etc.) construction.
2, the color of brick sidewalks and paving patterns Party units should obtain prior approval.
3 cushion with 6% cement sidewalk stable thick stone chips 15cm, brick sidewalk materials used are: color translucent concrete compression machine conjoined brick, size 25 × 12.5 × 5cm.
4, measuring up line:
Use of side stone edges, release midline; and measured in cycles of approximately 5m placed around the level of piles, to control the direction and elevation. Eucalyptus elevation and in vertical and horizontal edges hang to hang-based paving.
5, when laying brick sidewalks, Xian Pu 2cm thick layer of 1:3 cement mortar undercover leveling layer, further preform color brick paving.
6, after the precast block paved, filled with cement mortar filling seams, and key trace interpolation with gray mortar seams to full. Coverage after the completion of paving showered protection.
7, sidewalk drawings set under the A-and B-type barrier-free access, and sidewalk blind road.
帮助 收藏 报错 评论>> |
本类栏目导航
总点击排行
- 天正建筑2013最新64位破解版
- 160514次
- Autocad2013 64位32位破解版附带注册机
- 148307次
- 天正建筑8.5破解版
- 144042次
- autocad2012 64位32位 破解版(附注册
- 137474次
- 天正建筑8.2破解版
- 123392次
- autocad2010免费下载(简体中文版)
- 97140次
- CAD2008注册机及使用说明
- 80806次
- 免费农村房屋设计图
- 73715次
- cad图集大全
- 56756次
- 11g101图集全套下载
- 45286次
- 路缘石安装技术交底记录
- 1374次
- 施工组织设计交底记录
- 1155次
- 公路施工安全技术交底
- 1047次
- 检查井施工技术交底
- 868次
- 土石方开挖施工技术交底记录
- 829次
- 排水工程雨水管施工技术交底
- 757次
- 边沟盖板安装施工技术交底记录
- 756次
- 雨水管道安装技术交底记录
- 719次
- 墩柱施工技术交底
- 668次
- 综合管沟沟槽开挖、回填施工技术交底
- 609次